Clamps and couplings
Opt for the most efficient, durable and original Romac products. Sleeves and fittings are the solution for maintenance and repair of water systems and for all new installations.
PED offers a 24/7 emergency service to meet the needs of cities or municipalities for all water mains failures.
Poly-Expert Distribution is the exclusive distributor of Romac sleeves and fittings in Quebec.
Applications
For any questions about Romac sleeves and fittings, contact Luc Nadon directly at 514-475-1192 or via his email lnadon@poly-expert.com

304
# 304- Usage: Single-band stainless steel service saddle
- Dimensions: 2" - 8"
- Compatibility: Steel, cast iron, plastic, and other types of pipes
- Working pressure: Up to 150 psi

305
# 305- Usage: Double-band stainless steel service saddle
- Dimensions: 10" - 24"
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi

306
# 306- Usage: Single-band stainless steel service saddle
- Dimensions: 2" - 12"
- Compatibility: Steel, cast iron, plastic, and other types of pipes
- Working pressure:
- Pocket model: Up to 250 psi
- Traditional design:
- 2" - 8": Up to 200 psi
- 10" - 12": Up to 150 psi

400
# 400- Usage: Manufacturing fitting in steel for pipes 12 inches and larger
- Dimensions: 12 - 96 inches (larger sizes available upon request)
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Varies by case, up to 300 psi

400RG
# 400RG- Usage: Restraint fittings with steel rod
- Dimensions: 12 - 48 inches
- Compatibility: Ductile iron pipes
- Working pressure: Up to 350 psi

5930
# 5930- Usage : Machine used for wet or dry cuts to drill pressurized pipes
- Dimensions : 3/4 - 1 inch
- Compatibility : Polyvinyl Chloride (PVC), asbestos-cement, HDPE, ductile iron, steel, and cast iron pipes
- Working pressure : Up to 150 psi

5935
# 5935- Usage : Machine used for drilling pressurized pipes
- Dimensions : 3/4 - 2 inches
- Compatibility : Polyvinyl Chloride (PVC), asbestos-cement, HDPE, ductile iron, steel, and cast iron pipes
- Working pressure : Up to 150 psi

Alpha elbow 45D
# ALPHA 45- Usage : Retaining fitting at an angle of 45o for versatile use from PVC and IPS pipes to ductile iron pipes.
- Dimensions : 4 – 12 inches
- Compatibility : Ductile, PVC (IPS, C900, C909) and PEHD (DR 9 to 17)
- Working pressure : Up to 350 psi

Alpha end cap
# ALPHA EC- Usage : Wide range pipe end cap with built-in restraint.
- Dimensions : 4 – 16 inches
- Compatibility : Ductile iron, gray iron (Class A, B, C & D) PVC IPS (SCH 40, SCH 80, SDR 21) PVC C900, C909 et HDPE (size 4 – 12 inches)
- Working pressure : Up to 350 psi

Alpha FC
# ALPHA FC- Usage : Flanged coupling adapter provides a quick and easy way to connect
- Dimensions : 4 – 16 inches
- Compatibility : Ductile iron, Gray iron (Class A, B, C & D), PVC IPS (Sch 40, SCH 80, SDR 21), PVC C900, C909, and HDPE
- Working pressure : Up to 350 psi

Alpha restrained joint
# ALPHA- Usage : One piece of interlocking retaining coupling sleeve, covering PVC, IPS and ductile iron pipe diameters without changing components.
- Dimensions : 4 – 16 inches
- Compatibility : Ductile font, gray iron (Class A, B, C & D) PVC IPS (SCH 40, SCH 80, SDR 21) PVC C900, C909 et PEHD (size 4 - 12 inches)
- Working pressure : Up to 350 psi

Alpha TEE
# ALPHA TEE- Usage : T-branch restraint fitting for versatile use with PVC and IPS pipes, as well as ductile iron pipes.
- Dimensions : 6 – 12 inches
- Compatibility : Ductile iron, PVC (IPS, C900, C909), and HDPE (SDR 9, 11, 13.5, and 17)
- Working pressure : Up to 350 psi

B - 1
# B - 1- Usage : Direct and quick insertion of a corporation stop without assembly or disassembly for pressurized pipes
- Dimensions : 3/4 - 1 inch
- Compatibility : PVC, ductile iron, and cast iron pipes
- Working pressure : Up to 150 psi

B-TOO
# B-TOO- Usage : Allows for perforating and installing a compression stop on pressurized pipes. The B-Too uses saddles, taps, and suitable screw-on caps to ensure a secure installation.
- Dimensions : 3/4 - 1 inch
- Compatibility : PVC, ductile iron, and cast iron pipes
- Working pressure : Up to 150 psi

CL1
# CL1- Usage: Single-band ductile iron repair sleeve with cast arbor
- Dimensions: 2 - 12 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi (available with a threaded outlet)

CL2
# CL2- Usage: Double-band ductile iron repair sleeve with cast arbor
- Dimensions: 4 - 14 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi (available with a threaded outlet)

CL3
# CL3- Usage: Triple-band ductile iron repair sleeve with cast arbor
- Dimensions: 10 inches and larger
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi (available with a threaded outlet)

Coupling sleeve 501
# 501- Usage: Coupling sleeve with interchangeable seals and color-coded end rings
- Dimensions: 2 - 24 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 260 psi

Deep socket
# Deep Socket- Usage : Accessing hard-to-reach nuts or bolts (depth or narrow space)
- Dimensions : 1 ⅙ et 1 ¼ inches

DJ400
# DJ400- Usage : Disassembly joint and adjustable telescopic flanged couplings ideal for systems requiring periodic maintenance. The DJ400 can be adjusted in length to allow access for the installation or removal of valves and other equipment.
- Dimensions : 3 - 72 inches (more sizes available upon request)
- Compatibility : Steel, cast iron, plastic, and other types of flanged pipes
- Working pressure : Up to the maximum flange pressure

DJ405
# DJ405- Usage : Adjustable telescopic retaining joint (without rods) ideal for systems requiring periodic maintenance. The DJ405 can be adjusted in length to allow access for the installation or removal of valves and other equipment.
- Dimensions : 3 - 24 inches
- Compatibility : Steel, cast iron, plastic, and other types of flanged pipes
- Working pressure : Up to the maximum flange pressure

EC501
# EC501- Usage: End coupling sleeve with interchangeable seals and color-coded end rings
- Dimensions: 4 - 16 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 260 psi

ECF400
# ECF400- Usage : Connecting joint used to provide offset, deflection, and retention for systems with misaligned flanges.
- Dimensions : 3 - 72 inches (more sizes available upon request)
- Compatibility : Steel, cast iron, plastic, and other types of pipes
- Working pressure : Up to 300 psi, depending on the case

EJ400
# EJ400- Usage : For use on pipelines where longitudinal movements are concentrated
- Dimensions : 3 - 150 inches
- Compatibility : Steel, cast iron, plastic, and other types of pipes
- Working pressure : Up to 300 psi, depending on the case

FJ RESTRAINT
# FJ RESTRAINT- Usage : Flexible retaining joint that accommodates expansion, contraction, rotation, bending, and ground movement.
- Dimensions : 3 - 24 inches (more sizes available upon request)
- Compatibility : Steel, cast iron, plastic, and other types of flanged pipes or mechanical joints
- Working pressure : Up to 350 psi

Flanged Macro HP
# Macro HP FC- Usage: Flanged coupling sleeve that provides a flexible connection between flanged ends and plain-end pipes.
- Dimensions: 4 - 12 inches
- Compatibility: Ductile iron, cast iron, and steel pipes from 4 to 8 inches IPS Std.
- Working pressure: Up to 305 psi

FTS420T
# FTS420T- Usage: Double-band stainless steel service saddle
- Dimensions: 6" - 96"
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure:
- 6 – 24 inches : Up to 250 psi
- 30 – 42 inches : Up to 150 psi
- Larger than 42" : Up to 100 psi

GRIP RING
# GRIP RING- Usage: The gripring secures mechanical seals around their entire circumference
- Dimensions: 4'' - 12''
- Compatibility: Ductile iron, C900, PVC IPS pipes
- Working pressure: Up to 350 psi

IC400
# IC400- Usage: Steel manufacturing fitting with insulating sleeve to prevent electrolytic action by isolating the pipe ends.
- Dimensions: 12 - 96 inches (larger sizes available upon request)
- Compatibility: Steel, cast iron, and other metallic pipes
- Working pressure: Varies by case, up to 300 psi

IC501
# IC501- Usage: Insulating coupling sleeve designed to prevent electrolytic action by isolating one pipe from another
- Dimensions: 4 - 14 inches
- Compatibility: Steel, cast iron, and other types of metallic pipes
- Working pressure: Up to 260 psi

M-1
# M-1- Usage : A 10-pound machine used for drilling pressurized water pipes
- Dimensions : 3/4 - 1 inch
- Compatibility : Polyvinyl Chloride (PVC), asbestos-cement, HDPE, ductile iron, steel, and cast iron pipes
- Working pressure : Up to 150 psi

Macro HP Two-Bolt
# Macro HP Two-Bolt- Usage: The 2nd generation of ROMAC's two-bolt couplings. This two-bolt coupling offers a wide range of diameters.
- Dimensions: 2'' - 16''
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 305 psi

OD Tape
# OD TAPE- Usage: A pipe diameter tape measure allows for quick and accurate determination of the external pipe size, thereby facilitating the selection of appropriate components.

RC400
# RC400- Usage: Steel reducing manufacturing fitting for pipes 12 inches and larger
- Dimensions: 12 - 96 inches (larger sizes available upon request)
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Varies by case, up to 300 psi

RC501
# RC501- Usage: Reducing coupling sleeve with interchangeable seals and color-coded end rings
- Dimensions: 3 - 24 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 260 psi

Restrained Flange Couplings - RFCA PVC
# RFCA - PVC- Usage : Flange Retainer Coupling Adapter.
- Dimensions : 3 – 24 inches
- Compatibility : PVC
- Working pressure : Up to nominal pipe pressure

Restrained Flange Couplings Adaptors
# RFCA- Usage: Flange Retainer Coupling Adapter.
- Dimensions : 3 - 24 inches
- Compatibility: Ductile iron, cast iron and steel pipes 3- 12 inches IPS standard
- Working pressure : Up to 275 psi

SS1
# SS1- Usage: Single-band stainless steel repair coupling
- Dimensions: 2 - 12 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi (available with a threaded outlet)

SS2
# SS2- Usage: Double-band stainless steel repair coupling
- Dimensions: 4 - 14 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi (available with a threaded outlet)

SS3
# SS3- Usage: Triple-band stainless steel repair coupling
- Dimensions: 10 inches and larger
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 150 psi (available with a threaded outlet)

Stiffening Insert HDPE
# Stiffening Insert- Usage: Insertion stiffener for HDPE pipes
- Dimensions: 4 - 36 inches
- Compatibility: HDPE pipes

Tapmate
# Tapmate- Usage : Lightweight tapping machine for pressurized pipes
- Dimensions : 3 - 12 inches
- Compatibility : Polyvinyl Chloride (PVC), asbestos-cement, ductile iron, gray iron, steel, HDPE, and other types of pipes
- Working pressure : Up to 150 psi

Tapmate Dry Tap
# TAPMATE DRY TAP- Usage : Direct insertion of corporation stops designed for dry taps
- Dimensions : 3/4 - 1 inch
- Compatibility : Polyvinyl Chloride (PVC) pipes, ductile iron, and gray iron pipes

Tapmate too
# Tapmate too- Usage: Lightweight manual tapping machine for pressurized pipes
- Dimensions: 3/4 - 2 inches
- Compatibility: Polyvinyl Chloride (PVC), asbestos-cement, ductile iron, gray iron, steel, HDPE, and other types of pipes
- Working pressure: Up to 150 psi

Tapmate XL-424
# Tapmate XL-424- Usage: Tapping machine for large diameters for pressurized pipes
- Dimensions: 4 - 24 inches
- Compatibility: Tapmate and Quikvalve equipment, Polyvinyl Chloride (PVC), asbestos-cement, ductile iron, gray iron, steel, HDPE, and other types of pipes
- Working pressure: Up to 300 psi

TC400
# TC400- Usage: Steel transition manufacturing fitting
- Dimensions: 12 - 96 inches (larger sizes available upon request)
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Varies by case, up to 300 psi

XR501
# XR501- Usage: Extended diameter coupling sleeve
- Dimensions: 4 - 12 inches
- Compatibility: Steel, cast iron, asbestos-cement, plastic, and other types of pipes
- Working pressure: Up to 260 psi
Why choose us
- For the importance we attach to developing long-term, trusting relationships with our suppliers and customers.
- For the expertise of our team members in distribution and urban infrastructure and the concern to offer a quality service, regardless of your project.
- For the availability, exclusivity and quality of our products.